This topic has been archived. It cannot be replied.
-
枫下家园 / 生活杂事 / 请懂DVD,音响的朋友帮帮忙吧...先谢了!
-derekliu(Derek);
2002-7-31
{1014}
(#666196@0)
-
试过将它的L和R连接到被DVD和VCR占用的那2个口吗?
-chengary(gary);
2002-7-31
(#666201@0)
-
还没有。都是新机器,不会就坏了3个口吧?! 今晚去试试那2口,但即使成功,也不能以后老来回切换哪。
-derekliu(Derek);
2002-7-31
(#666255@0)
-
将你的VCR接到 Video 1 play in或 Video 2 play in,试试有没有声音, 如果有,说明口没有坏,那么你剩下的口不就可以用了吗?我觉得你不妨先把说明书通读1遍,因为电器的有些接口是专用的,这在说明书里会说明。
-chengary(gary);
2002-7-31
(#666272@0)
-
two ways to approach itI experienced the same problem as yours. There are two ways to approach it -- either your TV is equiped with an audio output or buy a VCR with audio output. If both your TV and VCR do not have audio output, it seems to me that you have to spend some extra money.
-helpless(吕洞宾);
2002-7-31
{262}
(#666231@0)
-
that means, in fact, most control receivers do not have the function to receive TV signal directly.
-helpless(吕洞宾);
2002-7-31
(#666241@0)
-
Really? Thanks first. Both my TV and VCR have output (and input). TV indicates "Audio to Hi-Fi", I guess that means I can connect it to Receiver? You mentioned VCR with output, how do you do it?
-derekliu(Derek);
2002-7-31
(#666271@0)
-
in this case, it would be easier. just connect the "TV audio output" to the audio jacks on your control receiver by using the cables with RCA pin plugs.
-helpless(吕洞宾);
2002-7-31
(#666931@0)
-
Yes, just like I described at begining, I did that, but there is no sound coming out from speakers.
-derekliu(Derek);
2002-7-31
(#666962@0)
-
1。没用过kenwood的receiver,我的是yamaha的。播放是你需要调整音源,假设你把电视的音频输出插到receiver的Video 1 play in,确认音源也是选择了video 1 play in2。Component Video Cable和Video Cable的差别就是前者是3根线,后者1根线,相当于前者的那根video线。是一回事,没有品质的差别。倒是S端子线比video线要好得多。如果你的receiver有S端子接口,可考虑换线。还有,可能多半是DVD Player的品质不好。
3。不太清楚。我的receiver上直接就有一个耳机输出,可支持Silence Cinema耳机或普通耳机。建议在研究一下说明书。
-bluej(小J);
2002-7-31
{339}
(#666957@0)
-
多谢,我调整过音源,这样我才可能正常的得到DVD和VCR的输入,很奇怪就是得不到TV的Audio. 另,你是说S-video比Component video还要清晰吗? 怎么我听说的正好相反。 你提醒了我在前面板上确实有一个耳机插口,谢了!
-derekliu(Derek);
2002-7-31
(#667037@0)
-
你可以去查查资料。S-Video比Video线的质量好得多。最简单的,从价钱上就能看出来:) 告诉你S端子不如Video线的那位一定是个假行家。:P
-bluej(小J);
2002-7-31
(#667045@0)
-
haha, I'm going to kill that guy! 但他告诉我的是:Component video > S-video > Standard video, 所以我跑去花$25买了Component cable(比普通video cable 贵不少). 你的意思是:S-video > Component video > Standard video?
-derekliu(Derek);
2002-7-31
(#667054@0)
-
你错了,Component 才是最好的,S-VHS 其次,然后是 Video,最差是 RF。
-syhhy(GoingWithTheFlow);
2002-7-31
(#667065@0)
-
另外,还有一个办法,就是电视的Cable插到你的录像机上,或买个叫D-Model,就可以得到component的输出,接到receiver上,再从reciever上的component out上输出到电视上。我就是这样做的。从电视再到音响,觉得不好。毕竟音响是专门处理声音的。经电视转一下手,信号可能就不是直接接到音响上的好。
-bluej(小J);
2002-7-31
{102}
(#667048@0)
-
Sorry, 新手confused. 我想做的只是把电视的声音输出到音响播放,为何要输出去又倒回来? 另,我也是想到音响是专门处理声音的,虽然我的receiver也可以处理video, 我还是想简单点:所有视频去电视机,所有音频去receiver, 你觉得怎样?
-derekliu(Derek);
2002-7-31
(#667067@0)