×

Loading...
Ad by
  • 最优利率和cashback可以申请特批,好信用好收入offer更好。请点链接扫码加微信咨询,Scotiabank -- Nick Zhang 6478812600。
Ad by
  • 最优利率和cashback可以申请特批,好信用好收入offer更好。请点链接扫码加微信咨询,Scotiabank -- Nick Zhang 6478812600。

This is your answer '

本文发表在 rolia.net 枫下论坛The answer is 1: The over load protection setting is too sensitive (when door only move small distant.)
2: The door is also set too much travel for the closing (over travel)

Yes. You can do it your self.
Found the turning knobs on the door opener, it should have 4 of them in most of the models, two "knob” marked with an arrow. One down and one up. . Turn the up arrow clockwise, to change the open and closing travel distant. This will fix up the door reopen when it hit the ground when closing.

The other two knobs are for the load setting, which marked with a circular arrow, clockwise and counterclockwise,
Counterclockwise increase the load. Clockwise to decrease the load,

Try it both why half turn each time, to found the proper setting, try it few time. (Remember this, no matter which way you turn, make note on how many turn you make, by remember this, in case if it do not make it better, then you always can go back to the original position)

This give an idea, you should read the owner manual more info is there更多精彩文章及讨论,请光临枫下论坛 rolia.net
Report

Replies, comments and Discussions:

  • 枫下家园 / 美丽家居 / 车库的门开关不灵了,请问是什么问题?能自己修吗?怎么修?谢谢!
    不管用车库里的开关还是遥控器,同样的问题。

    有一个门打开的时候,往上动一点就停下了,再按开关就关上了,再按开关就打开了。有时候就这样好几次也关不上。

    关门的时候呢,下到底又弹回去了。
    • This is your answer '
      本文发表在 rolia.net 枫下论坛The answer is 1: The over load protection setting is too sensitive (when door only move small distant.)
      2: The door is also set too much travel for the closing (over travel)

      Yes. You can do it your self.
      Found the turning knobs on the door opener, it should have 4 of them in most of the models, two "knob” marked with an arrow. One down and one up. . Turn the up arrow clockwise, to change the open and closing travel distant. This will fix up the door reopen when it hit the ground when closing.

      The other two knobs are for the load setting, which marked with a circular arrow, clockwise and counterclockwise,
      Counterclockwise increase the load. Clockwise to decrease the load,

      Try it both why half turn each time, to found the proper setting, try it few time. (Remember this, no matter which way you turn, make note on how many turn you make, by remember this, in case if it do not make it better, then you always can go back to the original position)

      This give an idea, you should read the owner manual more info is there更多精彩文章及讨论,请光临枫下论坛 rolia.net
      • 非常感谢,但还没有搞定。
        这个是照片,只有两个钮,一个叫 up force, 一个down force,墙上的控制器上标的是Sears Craftman。问题是下到最底就要关上是有戈激一大声,好像是哪里卡了,但Locate不到,我现在到处上点油试试。

        本来好的,最近才出的毛病。
      • 我的有类似问题,弄好了。谢谢指教!
    • 我换了一对红外探测器,问题就解决了。
      • 搞定了,就是因为卡住了所以机器以为夹到什么了又弹回去了吧。最后找到声音是门和上门框之间太紧。到处擦了点菜油就好了。谢谢各位。
        • 你到处擦了点菜油?等到菜油变粘糊了,你又会有麻烦。要用WD-40。
    • 有一阵我的车库门也是这样,后来发现是感应器的线快断了。